Adcom GTP-760 - Manual (Page 22)

30 Source Selectors (main, DVD, VCR, tuner, v. aux, CD, dig.1, dig.2.)
These buttons serve two functions.
•
First, they switch inputs on the GTP-760 so you can hear the source you’ve just selected.
• Second (and even more important), they can change the functions of all the other buttons on the
remote controller. In other words, if you first push the DVD device selector, the remote’s select/play
button generates a command code for your DVD player. If you then press the dig.2 device selector,
the same select/play button would send a different command code that might, for example, start
your mini-disc player. (Of course, this all depends on how you programmed the remote in the first
place. Don’t worry-we’ll cover that shortly.)
31 Power
•
In main mode (after you’ve pressed the main device selector), this is preprogrammed to turn the
GTP-760 on and off.
• In tuner mode, it is also preprogrammed to turn the GTP-760 on and off.
• The button is programmable for use with other sources.
32 Input Selectors (tape, LD)
•
In main mode, these are similar to the source selectors described above but they switch only
GTP-760 inputs. They DO NOT automatically change the functions of other remote buttons.
• These buttons are programmable for use with other sources.
33 Volume Up/Down
•
These are the only buttons preprogrammed at the factory with the same command.
In all modes, these buttons change the master volume setting of the GTP-760.
34 Tuning Up/Down
•
In tuner mode, these buttons are preprogrammed to scan up or down the GTP-760’s AM or FM band.
• They are programmable for use with other sources.
35 Guide
•
This is intended for easy call-up of cable or satellite program guides.
• Button is programmable for use with any source.
• In CD mode, it is preprogrammed for audible reverse scan with an ADCOM CD player
36 Menu
•
In main mode, this is preprogrammed to call up the GTP-760’s SETUP menu system.
(A subsequent push will exit the menu, regardless of which menu screen you are in.)
• It is programmable for use with any source.
• In CD mode, it is preprogrammed for audible forward scan with an ADCOM CD player
37 < (left arrow)
•
In main mode, this is preprogrammed to step through the various choices you might wish to select
while a menu item is highlighted.
• In CD mode, it is preprogrammed for audible reverse scan with an ADCOM CD player
• The button is programmable for use with any other source.
38 Up arrow/Pause
•
In main mode, this is preprogrammed to scroll up to the next choice on a menu screen.
• In CD mode, it is preprogrammed to pause an ADCOM CD player.
• In tuner mode, it is preprogrammed to start scanning preset frequencies higher than the
current station.
• The button is programmable for use with any other source.
39 > (right arrow)
•
In main mode, this is preprogrammed to step through the various choices you might wish to select
while a menu item is highlighted.
• In CD mode, it is preprogrammed for audible forward scan with an ADCOM CD player
• The button is programmable for use with any other source.
21