0 product features – Adcom GTP-760 User Manual

Page 7

Advertising
background image

1.0

PRODUCT FEATURES

1.1

Front Panel Controls

The GTP-760’s front panel is a model of simplicity. All controls are logically grouped for easy, intuitive
operation. Familiarize yourself with the following diagram and read the short explanations of each
feature. When you finish, you will be well on your way to enjoying the GTP-760’s convenience and
sound quality.

1

Headphone Jack: This accepts the stereo 1/4" phone plug connector used by almost all high
quality headphones. When you use the headphone jack, the GTP-760’s rear panel main line
level Preamp outputs are muted. Room 2 outputs are NOT affected.

2

Power Button and LED: Use this button to turn your GTP-760 ON and OFF. When you first
push the Power Button to the ON (depressed) position, the center LED will glow yellow until all
circuitry stabilizes. When your GTP-760 is ready to use, the LED will turn red.

NOTE: The front panel Power Button must be engaged to use the remote control. If the front
panel Power Button is not depressed, the remote control will not have any effect. When the
front panel Power Button is engaged, the remote controller’s “Power” button will cycle your
GTP-760 between standby and operation modes. When in standby mode (indicated by the
yellow LED), you need to press the remote control’s “Power” button to activate your GTP-760’s
circuitry (the LED will turn red when you do this).

3

Surround Mode Button and LED Indicators: Pushing the button sequentially steps your
GTP-760 through all the available operating modes for the selected input. The modes that are
not available for the current operating state are automatically bypassed.

For the 6 analog inputs, the choices are always the same -

Dolby Pro Logic, Dolby Pro Logic/

Cinema, symphony hall, stadium, jazz club, 5-chan. stereo, and 2-chan. stereo.

For digital inputs (DVD, digital 1 and digital 2) the choices are dynamic and depend on the type
of signal being input.

For DTS signals, the choices are

DTS, DTS/Cinema and DTS/2 chan. stereo.

For Dolby Digital 5.1 channel signals, the choices are

Dolby Digital, Dolby Digital/Cinema and

Dolby Digital/2 chan. stereo.

G T P - 7 6 0

D I G I T A L

phones

surround mode

DTS
Dolby Digital

D I G I T A L

S U R R O U N D

Cinema
Dolby Pro Logic
symphony hall
stadium
jazz club
5-chan. stereo
2-chan. stereo

DVD

digital 1

digital 2

dialog enhance

dynamic range

full
75%
50%
25%

FM/AM seek/manual

<

tuning

>

dim

5.1-channel in

CD

tape

tuner

room 2

1

2

3

4

5

6

7

shift (8-14)

LD

VCR

video aux

3

3

7

6

8

14

15

1

2

5

4

9 10

11

12 13

14

16 17

R D S P RO G R A M T Y P E A M F M S T E R E O S E E K VO L U M E M U T E P R E S E T

18

6

Advertising