Hunter 22555 10 Opal Glass Schoolhouse Globe - Manual (Page 4)

Installing the Light Kit on Fans with Non-Removable Switch Housing
1. Uninstall the two screws from the switch housing cover.
2. Remove the plug or screw from the center of the switch housing
cover.
3. Thread the switch housing cover onto the wires from the light kit. Align the large
ends of the keyholes in the light kit with the screw holes in the switch housing cover.
Install the nut and washer onto the threaded rod from the light kit to secure the
switch housing cover.
4. Finish attaching the light kit to the switch housing cover. Use the two attachment
screws removed from the lower switch housing and the lock washers on the red
tag. Partially install the screws into the light kit and the housing. Rotate the housing
counterclockwise until the screws are locked into the narrow ends of the keyhole
slots. Securely tighten the two screws.
WARNING: Improper installation could cause the light fixture to fall, or result
in electrical shock or personal injury.
5. Remove the wire nuts from the two wires in the switch housing labeled “Connect
Light Here” or “For Light Use.” One wire is white and the other wire is black/white
striped.
Connect the black/white striped wire from the switch housing to the black wire from
the light kit. Connect the white wire from the switch housing to the white wire from
the light kit. Secure all wire connections using wire nuts.
To connect the wires, hold the bare metal leads together and place a wire nut over
them, then twist the wire nut clockwise until tight.
CAUTION: Be sure no bare metal wires
or wire strands are visible after making the
connections.
6. Align the locator posts in the switch housing
cover with the screw holes in the switch
housing.
7. Align the threaded screw holes in the switch
housing cover with the threaded holes in the
switch housing and install two screws.
8. Go to the instructions for Installing the Bulbs,
Chains, and Globe.
O I
Steps 1–2
Steps 3–4 Steps 5–7
Non-Removable Switch Housing
Switch
Housing
Cover
Plug
Nut and
Washer
Screw
Hole
Switch
Housing
Cover
Wires and
Wire Nuts
Screw
43506-01 r032907 
Light Kit
Mounting
Plate