CEMB USA C73 (A) - Manual (Page 25)

I 0567 - 25 GB
6.9 - Correction method ►
One of the three possible correction methods can be selected based on the specifi c requirements of the customer.
6.9. ► 1 - Standard correction method
The wheel balancer considers the unbalance within tolerance when the value of each single plane is lower than the
tolerance set.
6.9.2 - External plane correction method ►
If correcting with adhesive weights, the unbalance is considered within tolerance when the recalculated external
plane weight (clip-on weights) is lower than the tolerance set.
Additional windows appear on the screen always displaying the residual external plane value (clip-on weight):
6.9.3 - I.C. (intelligent correction) correction method ► - The option is not enabled for Canada and the USA
The correction plane unbalance is considered within tolerance when both the STATIC and the DYNAMIC TORQUE
unbalances are lower than the tolerance set.
This correction method allows considerably reducing the weight to be applied, yet maintaining excellent balancing
quality. An icon appears on the screen showing the value of weight saved with respect to standard balancing.
If a special icon appears near the button , it means that the wheel balancer is suggesting static balancing,
however, such that also the dynamic torque unbalance will be brought within tolerance.
When pressing the button , the position repeater frame is accessed which clearly indicates where the weight
should be positioned in the rim.