6 - automatic gauges, 1 - rim distance gauge, P. 0 – CEMB USA K22 (A) User Manual
Page 15
Advertising
I 0574 -
15
GB
6.6 - Automatic gauges
6.6.1 - Rim distance gauge
- Shift the distance gauge to position
0
, keeping it quite still, press
- Move the gauge to position
150
, press
CORRECT CALIBRATION
- Return the gauge to rest position
- The wheel balancer is ready for operation
N.B.: In the event of errors or faulty operation, the writing
P. 0
appears on the display : shift
the gauge to position
0
and repeat the calibration operation exactly as described above. If
the error persists, contact the Technical Service Department. In the event of incorrect input in
the rim distance gauge calibration function, press
to cancel it.
Advertising