CEMB USA TDSP - Manual (Page 2)

CEMB/TDSP SYSTEM/VERSION 1/05-10-10
TDSP SYSTEM
The instrumentation for monitoring vibrations
and diagnostics of machinery using the TDSP
system is based on CEMB’s many years
experience in the field of vibro-technics and the
diagnosis of rotating machinery.
Thousands of CEMB systems have been installed
to protect steam / gas / hydraulic turbines,
pumps, compressors and fans.
In addition to all the principal functions required
for monitoring, the TDSP system is designed
with particular care to the operator interface, in
order to simplify all the operations necessary for
managing the equipment correctly.
The new TDSP system is designed using modern
DSP based architecture to meet the demands for maximum flexibility and modularity,
providing a high performance solution to a wide range of needs. The TDSP system can be
used either for protecting a single machine that calls for just a few measuring points,
monitoring, acquiring and storing typical data for intelligent supervision or as a
sophisticated diagnostic system used for machinery in a complete plant.
The system is based on the TDSP processing module, which is dual-channel and can
operate on a stand-alone basis. Its terminal board makes it possible to connect to
measuring transducers with analogue and digital inputs/outputs. The ethernet port on
the front is used for configuring the board and makes it possible to connect to a dedicated
PC that can be used for presenting data and for connecting to external diagnostic
systems and/or DCS.