CEMB USA TDSP - Manual (Page 3)

CEMB/TDSP SYSTEM/VERSION 1/05-10-10
1. Basic structure of the TDSP system
The basic composition is the most simple in the system and is normally used for
controlling a relatively low number (6-10) of measuring points spread over one or more
machines.
This solution guarantees the basic protection functions:
-
Acquisition of sensor signals (accelerometers, velocity sensors and proximity
probes)
- Availability of an analogue signal (0 – 10 V or 4 – 20 mA) proportional to the
magnitude measured
- Availability of alarm contacts when prepoints are exceeded
Depending on the number of channels, the instrumentation’s structure comprises:
-
A standard 19” rack
- Power supply (possibly redundant)
- Up to 8 TDSP modules
Software for setting all the operating parameters for the processing module simplifies this
operation and makes it possible to save all the settings selected in a PC.