CHIEF SSBU-SSMU Interface - Manual (Page 8)

SSBU/SSMU Installation Instructions
8
Attach SSBU/SSMU to UL Listed RSA or RSM
1. On SSBU, partially install four thumb nuts (D) to SSBU main
plate screws. (See Figure 8)
Figure 8
2. Place SSBU/SSMU base plate (B) over SSBU/SSMU
interface plate (A). (See Figure 9)
Figure 9
3. Attach SSBU/SSMU to RSA/RSM. Refer to RSA/RSM
installation manual for details.
Security Screw Installation (Optional)
1. Install #8-32 x 3/8" button head security screws (F) into
security holes on SSBU/SSMU legs. (See Figure 10)
NOTE: Up to two security screws can be installed on each leg.
It is recommended that screws be installed in holes that
are difficult to access to achieve maximum security.
NOTE: Cable ties (not included) may be used instead of the
security screws. Thread cable tie through both holes on
leg and secure cable tie.
Figure 10
(D) x 4
(A)
1
(B)
(A)
2
(C)
security hole
(F)
1