Power mode and battery recharging – AVERATEC Voya 320 GPS User Manual

Page 11

Advertising
background image

5

Inserting SD/MMC Memory Card

Insert the SD/MMC memory card into the slot while paying attention to the orientation of the card
as shown below:

Exerting excessive force to insert into the slot in the wrong direction may damage the SD/MMC card or slot

Power Mode and Battery Recharging

Power Mode

Conditions of Charged Battery

External Power Mode

Power is supplied to the system for operation from the AC/DC
adapter or the cigarette adapter/charger in your car.

[Power button

] lights red: The battery is being charged.

[Power button

] lights green: The battery is fully charged.

Battery-Powered Mode

Power is supplied to the system for operation from the battery.

[Power button

] lights red: The battery is being charged.

[Power button

] lights green: The battery is fully charged.

Power-Saving Mode

Pressing the Power button

switches the system to the

power-saving mode. Pressing the power button again returns the
system to the operation mode.

Forced Power-Saving Mode

When the remainder power in the battery is 20-30% of its full
capacity, the warning window is display ed. In such a case,
immediately recharge the battery. If the battery is almost
discharged, it enters forced power-saving mode automatically.
Once it enters the forced saving mode, it cannot be turned on
ag ain until the power is supplied by connecting the cigarette
adapter/charger or AD/DC adapter.

 It takes three hours or longer to ful ly charge the battery from the forced power-saving mode, when using the

navigation function only in the preference conditions.

 It is possible to operate the system with the fully charged battery for about two hours, when using the

navigation function only in the preference conditions.

 Battery life will vary depending on usage.

!

Note

!

Note

Advertising