AVERATEC Voya 320 GPS - Manual (Page 12)

6
About Reset Mode
Two reset modes are provided on the system. You can select the
desired reset mode by pressing the reset button on the rear of the body
as
shown right.
Soft Reset
Execute the soft reset by the pressing the Reset button as
shown left:
Lightly press the button once.
Function
Lightly pressing the Reset button exits all of the current
programs, and restarts the system. This mode is used when the
system is shut down due to fault in programs.
Hard Reset
Execute the hard reset by pressing the Reset button as shown
left.
Function
Press the Reset button until the unit turns off. After three
seconds, lightly press the reset button again to restart the
system. This mode is used when the soft reset does not solve
the problem.
 The soft reset mode is not allowed when the system is connected to a PC via the USB cable.
 You MUST reset the system when supplying power to the fully discharged system.
After Reset
After r eset, the system starts up.
!
Note