CHIEF FSRI2T - Manual (Page 6)

FSRI2T Installation Instructions
6
3. Attach power cord to iPad, if desired. Cable must pass
through wall and be connected to an appropriate power
supply. (See Figure 9)
4. Slide iPad into FSRI2T mount, ensuring that power cord is
placed in slot located on FSRI2T.
5. Replace end piece of FSRI2T.
6. Fasten FSRI2T together using the two 06-32 x 1/4"
buttonhead security screws removed previously in Step 1.
(See Figure 9)
Figure 9
4
iPad
3
5
x 2 6
Power cord from
appropriate power
supply behind wall.