CHIEF YF1F12-20-28 - Manual (Page 5)

Installation Instructions YF1F12-20-28
5
INTRODUCTION
The F1 Series racks may be configured with optional
accessories (not included) such as levelers, fan panels, etc. All
accessory installation instructions accompany the accessories.
NOTE: The bottom cover panel may be removed for wire entry
or may be replaced with a filtered fan panel. Follow
instructions included with the fan panel. (See Figure 1)
NOTE: The panels on the back door may be replaced with fan
panels. Follow instructions included with the fan panel.
(See Figure 2)
Figure 1
Figure 2
INSTALLING CASTERS
1. Attach one caster (B) to each lower corner of the F1 rack
using one F1 caster spacer (C) for each caster. (See
Figure 3)
Figure 3
2. Lift rack to upright vertical position after casters are
installed.
3. Lock casters.
May be removed
for wire access or
replaced with a fan panel
(Door removed for clarity)
(Rear view)
May be replaced
with fan panels.
1 (B) x 1
(C) x 1