CHIEF YF1F12-20-28 - Manual (Page 6)

YF1F12-20-28 Installation Instructions
6
OPTIONAL ASSEMBLY
Levelers
1. Add optional levelers to the rack following instructions
included with the levelers.
Doors (Change hinged side)
NOTE: The doors can be changed to open on the opposite side
from the way they shipped.
1. Open door to expose hinge at top and bottom of door. (See
Figure 4)
Figure 4
2. Squeeze hinge tab at top and bottom of door and pull door
straight out to remove from rack.
3. Turn door over and re-insert hinges into other side of rack.
4. Slide doors into rack until the hinges "click" into the racks.
Hinge Adjustment
If necessary, the door hinges may be used to adjust the depth,
horizontal or vertical placement of the doors (See Figure 5).
1. Adjusting these screws will allow vertical adjustment (up
and down) of the door. (See Figure 5)
2. Adjusting this screw will allow depth adjustment (into and
out from rack) of the door. (See Figure 5)
3. Adjusting this screw will allow horizontal adjustment (side to
side) of the door. (See Figure 5)
Figure 5
Inside of
Door hinge
front door
(Top of rack removed
for clarity)
Hinge
tab
Doo
r
Rac
k s
ide
Rack
Side
Door
1
2
1
3
3
2