Mounting to floor – CHIEF RFM Series User Manual
Page 7
Advertising
Installation Instructions
RFM Series
7
Mounting to Floor
WARNING:
RFM Series racks MUST be mounted to the
floor prior to use! Secure rack to floor prior to installing
components to rack.
1.
Mark and drill four holes at desired mounting location using
the holes on rack bottom as a template. (See Figure 7)
2.
Use four screws of proper size (not included) to mount RFM
mount to floor at desired mounting location. (See Figure 7)
IMPORTANT ! : Type and size of hardware required may
vary based on type of floor surface.
Figure 7
x 4
2
Advertising