CHIEF PAC715 - Manual (Page 5)

Installation Instructions PAC715
5
Installation
NOTE: The PAC715 video conferencing shelf can be mounted
before or after the display is mounted to the faceplate.
It may be mounted above or below the display if
mounting to a large faceplate. It may only be mounted
above the display if mounting to a medium faceplate.
Attach to Large Faceplate
1. Position video conferencing shelf (A) above or below the
faceplate making sure to line up the holes on the shelf with
the holes on the faceplate. (See Figure 1 or 2)
2. Install two 1/4-20 x 3/4" button head cap screws (B) through
holes in shelf and faceplate. (See Figure 1 or 2)
3. Thread two 1/4-20" lock nuts onto screws to secure shelf to
faceplate. (See Figure 1 or 2)
Figure 1
Figure 2
Attach to Medium Faceplate
NOTE: The PAC715 may only be mounted above the display
when mounting to a medium faceplate.
1. Use two 1/4-20" lock nuts (C) to secure medium faceplate
adapter (D) to top or bottom of medium faceplate. (See
Figure 3)
2. Thread two 1/4-20" lock nuts (C) onto screws to secure
shelf to medium faceplate adapter (D). (See Figure 3)
Figure 3
1
(A)
3
(B) x 2
(C) x 2
2
faceplate
(top installation)
large
(bottom installation)
(B) x 2 2
faceplate
3 (C) x 2
1
(A)
large
(A)
2 (C) x 2
(D)
1 (C) x 2
medium
faceplate