ACT Meters GOLD-PLUS 6V/12V Battery Tester - Manual (Page 7)

Operating Instructions
www.actmeters.com
7
STEP 3
‘POWERING UP’ followed by ‘ANALYSING BATT’ is displayed. During
analysis, a pulsed load removes any excess surface charge.
STEP 4
The message ‘SET CALIBRATE’ reminds you to check that the Ah
Calibration position is adjusted to test a standby SLA, cyclic GEL
or car FLOODED battery.
STEP 5
The message ‘TESTING VOLTS’ followed by ‘PLEASE WAIT’ indicates
that the battery tester is automatically selecting to test a 6V or
12V battery.
POWERING UP...
ANALYSING BATT.
SET CALIBRATE
TESTING VOLTS...
PLEASE WAIT...