ALLIED Vision Technologies Guppy PRO F-503 - Manual (Page 110)

Description of the data path
Guppy PRO Technical Manual V4.0.0
108
Mirror function (only Guppy PRO F-503)
Guppy PRO F-503 cameras are equipped with a mirror function, which is built
directly into the sensor. The mirror is centered to the current FOV center and
can be combined with all image manipulation functions, like binning.
This function is especially useful when the camera is looking at objects with
the help of a mirror or in certain microscopy applications.
• With Guppy PRO F-503B, horizontal and vertical mirror is possible.
• With Guppy PRO F-503C, only horizontal mirror is possible.
Note

Configuration
To configure this feature in an advanced register: See Table
139: Advanced register: Mirror on page 258.
Note

The use of the mirror function with color cameras and image
output in RAW format has implications on the BAYER-
ordering of the colors.
Figure 42: Mirror and Bayer order
Note

During switchover one image may be temporarily corrupted.
Horizontal mirror ON: R-G-G-B (only F- 503C ) Mirror OFF: G-R-B-G (only F-503C)