Normal conditions, Error conditions, Normal conditions error conditions – ALLIED Vision Technologies Guppy PRO F-503 User Manual
Page 75
Camera interfaces
Guppy PRO Technical Manual V4.0.0
73
Normal conditions
Error conditions
Blink codes are used to signal warnings or error states (When S1 and S2 blink
together, you see blinking orange):
•
S1 means green half of LED
•
S2 means red half of LED
•
Example: LLC not ready S1 (3 blinks) + S2 (5 blinks): 3 orange blinks
and afterwards 2 red blinks
Event
(GREEN)
(RED)
Camera startup
During startup all LEDs are switched on consecu-
tively to show the startup progress:
(GREEN
+
RED)
long time
then
(GREEN
+
RED)
short time
then
GREEN
permanent on
Power on
GREEN
Bus reset
not available
Asynchronous traffic
+GREEN pulsing
Isochronous traffic
+GREEN pulsing
Waiting for external
trigger
GREEN
RED
External trigger event
GREEN
+RED pulsing
Table 21: LEDs showing normal conditions