ALLIED Vision Technologies Goldeye P-032 SWIR - Manual (Page 14)

IP settings: preliminary considerations
How to install a GigE camera (Bigeye/Pearleye/Goldeye) V2.1.0
14
Static Persistent IP for GigE Vision camera
To store a persistent IP for a camera with GEV firmware, use the Pleora software
GEVPlayer. Please refer to Chapter
Installing GigE driver from Pleora on page
18.
1. Open GEVPlayer, select the camera and set the desired persistent IP
2. Open the GEV Device Control dialog and change the following values:
GevCurrentIPConfigurationPersistentIP
 Set to true
GevPersistentIPAddress
 Set IP Address
GevPersistentSubnetMask
 Set Subnet Mask
Figure 3: GEV Device Selection