ALLIED Vision Technologies Goldeye P-032 SWIR - Manual (Page 38)

Adjusting firewall settings
How to install a GigE camera (Bigeye/Pearleye/Goldeye) V2.1.0
38
Adjusting firewall settings
1. For the first test all firewalls and antivirus solutions should be disabled.
Only when the camera can be accessed properly without any firewall one
can try to adjust firewall settings step by step.
The communication from and to the camera is done in the UDP protocol.
2. A global rule for incoming and outgoing traffic should be created
Rule: Pleora outgoing (Allow)
• Protocol: UDP
• Direction: Outgoing, Packet type: Local
• Remote Host: 255.255.255.255
xxx.xxx.xxx.xxx IP range the camera is in,
e.g. 169.254.*.*
• Remote Port: 4
68
3956
20200
20201
20202
Rule: Pleora incoming (Allow)
• Protocol: UDP
• Direction: Incoming
• Remote Host: xxx.xxx.xxx.xxx IP range the camera is in,
e.g. 169.254.*.*