Alpine DVI-9990 - Manual (Page 12)

11
-EN
• System Connection <Example 2>
NOTES
•
Do not install the power supply unit where it will be exposed to moisture such as under the floor mat or near the air
conditioner. This may cause a malfunction.
• Do not bundle the power supply unit cable with the audio cables. Noise may be induced into your system.
• The power supply unit temperature can become hot. This is not a malfunction.
* For the Ferrite Core, refer to the Owner’s Manual of the product that the IONBUS cable is attached to.
Power supply unit
Antenna Receptacle
To antenna plug of the vehicle
To power antenna
To the instrument cluster illumination lead
Connect to a metal part of chassis body with a screw.
Ignition Key
Blue
Orange
Black
Red
Yellow
Fuse (7.5A)
Battery
Video output connector
IONBUS cable
(Included with the PXI-H990 or DAI-C990)
DVD Audio Link cable
(Included with the PXI-H990 or DAI-C990)
Multimedia Manager
PXI-H990
or
DAC unit
DAI-C990
(sold separately)
External TV
monitor
(sold separately)
Connectable system products
Multimedia Manager or DAC unit
External TV monitor PXI-H990 or DAI-C990
IONBUS incompatible
TV monitor
Yellow
RCA Extension cable (video)
(Included)
POWER
ILLUMINATION
GND
IGNITION
BATTERY
To DVD Audio Link
terminal
To IONBUS
terminal
System switch
• Set to SINGLE when
connecting one PXI-H990.
• When connecting two PXI-
H990s, set the first to FRONT,
and the second
to REAR.
*
*