Analog Way Shot Box - LiveCore platform User Manual
Quick start guide, Shot box for livecore™ series, Ref. sb-80
Shot Box for LiveCore™ series
- Ref. SB-80
QUICK START GUIDE
• 1 x SB-80 Shot Box
• 1 x Carrying case
• 1 x USB stick containing both the Windows and MAC OS X setup applications*
• 1 x Quick start guide*
* The quick start guide and the setup applications are also available on
www.analogway.com
Windows: Microsoft® Windows® XP with SP3, Microsoft® Windows® 7 with
SP1, Windows 8, Windows 8.1 or above 50 MB of available hard-disk space for
installation. LAN connection
Mac OS: Mac OS X Lion v10.7, Mac OS X Mountain Lion v10.8, Mac OS X
Mavericks v10.9 or above 50 MB of available hard-disk space for installation.
LAN connection
Shot Box for LiveCore™ series can only connect one single SB-80 Shot Box device at a time
and does not support LiveCore™ firmware versions prior to version 1.3.x.
WHAT’S IN THE BOX
SYSTEM REQUIREMENTS AND LIMITATIONS
QUICK INSTALL AND SETUP
• Installing Shot Box for LiveCore™ series on Windows
Plug the USB stick provided with the package then locate the Shot Box for LiveCore™
series installer for Windows (the file name is SetupShotBoxLiveCore_<version>.exe).
You can also download the latest updates from the Shot Box download area on
www.
analogway.com
. Double-clicking this file will launch the installer that will install Shot
Box for LiveCore™ series on your system.
• Installing Shot Box for LiveCore™ series on Mac OS X
Plug the USB stick provided with the package then locate the Shot Box for LiveCore ™
series installer for Mac OS X (the file name is SetupShotBoxLiveCore_<version>.pkg).
You can also download the latest updates from the Shot Box download area on
www.
analogway.com
. Double-clicking this file will launch the installer that will install Shot
Box for LiveCore™ series on your system.
• Configuring Shot Box for LiveCore™ series
Plug your SB-80 Shot Box into the USB port and wait for your system to recognize it.
When you plug a USB Shot Box device into a Mac for the first time, the Keyboard Setup
Assistant will launch automatically. Close this assistant to continue. When ready, start
the Shot Box for LiveCore™ series application: