BEI Sensors Industrial Duty Inclinometers - Manual (Page 7)

Page 7 CANopen Industrial Datasheet Version 20130503
INDUST RIAL I NCLI NOME T ER
CA NOPE N INT ERFA CE
Pin Assignement
The inclinometer is connected via a 5 pin M12 A-coded round connector.
(Standard M12, Male side at sensor, Female at connector counterpart or connection cable)
For more detailed information about setup, measurement axes and programming,
refer CANopen Manual.
Please read the instruction leaflet carefully prior to installation.
CANopen Output
Signal 5 pin round connector pin number
CAN Ground 1
+Vs: Supply Voltage 2
0 V Supply voltage 3
CAN High 4
CAN Low 5
INC-360 – Output values (factory setting: Resolution = 0.01)