Acoustic Research ARIR150 - Manual (Page 11)

10
5. Set up the radio
A. The radio displays the Select Language
screen. Press or to choose your language
and then press SELECT.
English
Français
Español
B. The radio initializes the Wi-Fi network and
start scanning available network. The SSID
(network name) of those found will be
displayed after searching. Press or to
select a desired network and then press
SELECT.
Network 1
Network 2
Network 3
• Signal strength is indicated by .
• Secured network is indicated by
(unsecured network has none, as Network 1
in the above example).
• If a secured network is selected, you will be
required to enter your password in the
Network Security screen.
<END 0 12345>
The radio should then connect to the
Internet.
• If the network SSID is hidden (not
broadcasted), you will only see a padlock icon
and signal strength bars like the 1st network
shown above. Press
and then to
highlight Enter network name on the display
and then press SELECT.
• Refer to page 22 if you want to Use WPS to
connect to the Internet. Then go to step C to
complete your connection.
C. If Enter network name is selected, the
following screen will be displayed. Enter your
network name.
<END 0 12345>
• If your network is secured (indicated by ),
you will be asked to enter your network's
security type and password. The radio should
then connect to the Internet.
This method uses your existing Wi-Fi access
point, broadband modem or router to connect
the radio to your existing network.
You need to know your Wireless Network’s
name (SSID) and if your wireless network has
security enabled, you will also need to know
your wireless network password (sometimes
called passphrase or key). You can find this
information on your broadband modem,
router or access point’s administration setup
page or manual. You may also call your
Internet Service Provider (ISP) if you do not
know how to access the administration page
in order to find this information. They usually
have a 1-800 number available. Once you have
the below information you may write it down
for future reference.
• Wireless network name (SSID)
• Security Type (Only needed if your
network has security enabled and your
SSID is hidden, not broadcasted)
• Password/Key (Only needed if your
network has security enabled)
Refer to Using the menus on page
13 for more information on making
choices and inputting information in
menus.