Acoustic Research ARIR150 - Manual (Page 22)

21
Changing radio's settings
To change the radio settings:
1. Press to display the Source menu.
2. Press or to highlight Settings and then
press SELECT.
3. Press or to highlight a setting and press
SELECT to enter the sub-menu.
Network Setup
Software Update
Weather
Advanced Setting
• Repeat this step to browse for more settings
and sub-menus.
Network setup
To change the network setting of the radio: Scan
for network, Enter network name, Use WPS, View
Config, Edit Config, Signal Warning and Scan for
Networks.
• If
Use WPS is selected, you can select from
PBC Mode or PIN Mode. Then press SELECT
to start. You can also press the WPS button at
the back of the radio to activate the WPS PBC
mode.
PBC mode
PIN mode
• If PBC Mode is selected, remember to press
the WPS button on your router. The open WPS
device of those found will be displayed after
searching. Some routers may timeout the
connection in one minute, you may repeat
the process again if the connection fail.
• If PIN Mode is selected, the following screen
will be displayed. Enter the PIN shown into
your WPS router's settings.
WPS
PIN: 11318880
SELECT to start
• If the unit is successfully paired up with open
WPS router, the radio should then be
connected to the Internet.
To check IP address:
• Press to display the Source menu.
• Press or to highlight Settings and then
press SELECT.
• Press or to highlight Network Setup and
then press SELECT.
• Press or to highlight View Config and
then press SELECT.
• Press or to select IP Address.
Software updates
To check if newer firmware is available. Follow
the instructions on the display for update.
Account info
• To change the login information (username
and password) sent by the radio when
attempting to login to the MP3tunes services.
• To edit the locale for time and weather
functions. The locale is used for clock time
setting, weather forecast and searching local
Internet radio stations in your area.
Device info
To show the model number, firmware version,
MAC address, PIN number of the radio, press
or . MAC address and PIN are necessary to
activate your AR Infinite Radio accounts.
Display
To change brightness and contrast of the display.
Settings
If you have changed your account
information through MP3tunes'
website, please also edit the account
information in this setting. The
information here must match your account
information online.