Alcatel Carrier Internetworking Solutions 1000 ADSL User Manual
Page 25
10. Click OK to continue. This initiates configuration of the RAS.
N
N
N
o
o
o
t
t
t
e
e
e
:
:
:
You have completed the first part of the installation by adding PPTP as a
remote protocol. The remaining steps configure RAS for PPTP.
11. In the Remote Access Setup Window (figure 11), add the new VPN ports to
RAS by clicking Add. The Add RAS Device window appears (see figure 12).
Figure 11. Remote Access Setup Window
Figure 12. Add RAS Device Window
12. Each RAS Capable Device (also called a port) must be added individually.
Double-click a port and click OK. The Remote Access Setup Window (refer
to figure 11) returns.
13. Repeat steps 11 and 12 until all VPN ports are listed in the Remote Access
Setup Window. Then proceed with step 14.
14. The ports are configured for dial-in only. To change this, select a port in the
Remote Access Setup window and click Configure. The Configure Port
Usage Window appears (see figure 13).