Draw-Tite 6002 GOOSENECK PLATE - Manual

INSTALLATION INSTRUCTION
GOOSENECK TRAILER HITCH
6002
1. Place base rails across truck bed. Place hitch on base rails to establish spread between rails
and install base rail mounting kit 30095 or 30035 per kit instructions. Drill holes and add
additional bolts (supplied with the gooseneck ball mount) at center holes in base rails using the
hole closest to the truck bed channel.
2. Install pull pins and lock in place with spring cotter pins.
3. When safety chains are used, place chain link in slot and install additional pull pins (not
furnished) and lock in place with spring cotter pins (not furnished). Safety chain kit 50223 can
be used.
For Installation Assistance or Technical Help, Call 1-888-521-0510
© 2011 Cequent Performance Products, Inc.
WARNING!
DO NOT EXCEED THE
MANUFACTURERS GVWR
FOR YOUR VEHICLE.
Note!
Block rear of trailer when loading and
unloading trailer to prevent negative trailer
tongue load when using this product.