Draw-Tite 6002 GOOSENECK PLATE - Manual (Page 2)

SUPPLEMENT TO 30095N
½” CARRIAGE BOLT (29)
SPACER (30)
SERRATED WASHER (31)
LOCK WASHER (32)
½” HEX NUT (33)
INSTALL BOLT IN EITHER POSITION. WHICHEVER IS
CLOSEST TO UNDER BED SUPPORT. RAIL MAY BE
TURNED TO CHANGE HOLE LOCATION FROM FRONT
TO BACK.
ADDITIONAL MOUNTING INSTRUCTIONS:
Install base rails as instructed in respective instructions. The instruction below is for the
addition of the 2 center bolts for applications using 30095.
1. Place base rails in accordance with base rail mounting instructions.
2. BEFORE DRILLING ANY HOLES, CHECK FOR CLEARANCE AROUND THE GAS TANK.
3. Using the center hole in the base rail as a guide, drill a ½” hole through the truck bed.
4. Insert ½” carriage bolt (29) into the hole. Install ½” serrated washer (31), ½” lock washer (32) and ½”
6002IN-16FEB11E PCN14844 © 2011 Cequent Performance Products, Inc. Litho in USA
Cequent Performance Products Inc. warrants its Gooseneck Ball Assembly from date of purchase against defects in material and workmanship
under normal use and service, ordinary wear and tear excepted, for 5 years of ownership to the original consumer purchaser when a Cequent
Performance Products Inc. mounting kit is used.
Cequent Performance Products Inc. will replace free of charge any part which proves defective in material or workmanship when presented to any
Cequent Performance Products Inc. dealer or Cequent Performance Products Inc. warehouse, or when returned to the factory,
TRANSPORTATION CHARGES PREPAID, at the address below. THIS WARRANTY IS LIMITED TO DEFECTIVE PARTS REPLACEMENT
ONLY. LABOR CHARGES AND/OR DAMAGE INCURRED IN INSTALLATION OR REPLACEMENT AS WELL AS INCIDENTAL AND
CONSEQUENTIAL DAMAGES CONNECTED THEREWITH ARE EXCLUDED.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to
you.
Any damage to the Gooseneck Ball Assembly as a result of misuse, abuse, neglect, accident, improper installation, or any use in violation of the
instruction furnished by us WILL VOID THE WARRANTY.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. In the event of a problem with
warranty service or performance, you may be able to go to a small claims court, a state court, or a federal district court.
FIVE YEAR LIMITED WARRANTY
Cequent Performance Products, Inc.
47912 Halyard Dr., #100
Plymouth, MI 48170 USA
4. Insert ½” carriage bolt (29) into the hole. Install ½” serrated washer (31), ½” lock washer (32) and ½”
nut (33).
5. Insert spacer (30) between the truck bed and the base rail. It will go in between at the corrugation of the
bed. To keep bed from crushing when the bolt is tightened.
6. Repeat for the other base rail.
7. Torque the ½” nuts to 75 ft/lbs.
For Installation Assistance or Technical Help, Call 1-888-521-0510