Draw-Tite 4446 GOOSENECK RAIL KIT - Manual (Page 4)

Installation Instructions
Part Numbers:
4446
GOOSENECK MOUNTING KIT
Dodge Ram 1500
Short & Long Bed
Trimming of plastic inner fender liner
Note! Ask truck owner what option they would like done on their truck before
cutting liner. Shown below is one option for trimming fender liner. Fender liners are
removed by taking off (11) screws holding liner to wheel well.
Looking at inner fender liner from
side of truck. Tire not shown. Transition lines showing
offset in plastic.
E i ti fil
Cut opening
4 1/2” to 5” wide
Existing profile
edge of plastic.
4-1/2 to 5 wide
Cut opening
up to transition line,
about 5” from
bottom edge.
z 2008, 2009, 2010, 2011 Cequent Performance Products Sheet 4 of 8 4446N 6-9-11 Rev. E