Installation instructions – Draw-Tite 4446 GOOSENECK RAIL KIT User Manual

Page 8

Advertising
background image

Installation Instructions

Part Numbers:

4446

GOOSENECK MOUNTING KIT

Dodge Ram 1500

Short & Long Bed

5/8” u-bolt 5-1/2” length – 2 places

14.

Install the hitch into the opening.

15.

Use the installed hitch as a guide to drill the forward 5/8” diameter holes mounting holes. Also drill the 5/8”

diameter U-Bolt holes if installing a 6300 or 8339 gooseneck hitch.

6300/8339 GOOSENECK HITCH INSTALLATION

5/8” X 2.50” Carriage Bolt

Lock washer

Hex Nut

4 Places

9

Gooseneck

platform

5/8 u bolt 5 1/2 length 2 places

Safety chain attachment

Truck bed corrugation

1” x 2” shims

4 places

Figure 5

Large flat washer – 8 places

Spring – 4 places

Forward cross member

3 visible full bolt

threads required

5/8” – 18 locking jam nut

4 places

16.

Before installing the 5/8” carriage bolts through the hitch, the U-block shims must be placed between the hitch and

the bed and between the cross members and the bottom of the bed (see Figure 5). These shims are necessary to

prevent the bed corrugations from collapsing when the bolts are tightened.

17.

Install the 5/8 X 2.50 GR5 carriage bolts through the hitch, shims and cross members. Secure with lock washers and

nuts. Torque nuts to 150 ft.-lb. (203 N-m).

18

F

6300

d 8339 I

ll i

I

ll h (2) U B l

h

h h hi h

d f

d

h

hi l i

ll h

18.

For 6300 and 8339 Installations: Install the (2) U-Bolts through the hitch and from under the vehicle install the

large flat washer over the U-Bolt followed by a spring, another large flat washer and secure with a thin 5/8” jam nut.

Repeat for the other legs of the U-Bolts. The 5/8” jam nuts are tightened until (3) threads are visible past the bottom

of the jam nut.

19.

Torque the 5/8-11 GR5 fasteners that attach the threaded studs on forward rail to the frame brackets to 150 ft.-lb.

(203 N-m). Torque the 1/2-13 GR5 fasteners that attach the clamp brackets and frame brackets to the vehicle frame

to 75 ft.-lb. (102 N-m).

20.

Re-attach the wiring harness and vapor tube to the vehicle cross member. Also inner fender liners if truck owner

g

p

chooses.

z

2008, 2009, 2010, 2011 Cequent Performance Products

Sheet 8 of 8

4446N

6-9-11

Rev. E

Advertising