Draw-Tite 59502 CARGO CARRIER - HITCH MOUNTED - Manual (Page 2)

Product Code:
Product Name:
Cequent Consumer Products Inc
Solon, OH 44139 USA
Cequent Help Hotline: 1-800-234-6992
www.rolaproducts.com
Cargo Carrier
59502
Please read all instructions carefully before assembly, installation and/or use of this product.
3
7/16 x 1.00” HEX BOLT
7/16 LOCK NUT
(4 PLACES)
SHANK ASSSEMBLY
MOUNTING
TAB
CARGO BASKET
ATTACH SHANK TO CARGO BASKET
• Place shank assembly onto the cargo basket lining up the four holes in shank assembly with the holes in the
four mounting tabs on the cargo basket.
• Install four 7/16 hex bolts and lock nuts as shown.
• Tighten all 7/16-14 GR5 bolts to 55 ft•lb
LOADING
Load the Cargo Carrier so that most of the weight is in the center of the platform.
IMPORTANT NOTE
If the Cargo Carrier or cargo, blocks the license plate, you can mount the license plate directly to the back of
the cargo carrier using the two existing holes in the chrome support tubes. (screws not included)
LICENSE PLATE MOUNTING HOLES
CORRECT
INCORRECT
Page 2
59502N Rev A 4-5-05