Draw-Tite 59108 ADVENTURE SYSTEM - Manual (Page 3)

Product Code:
Product Name:
Cequent Consumer Products, Inc.
Solon, OH 44139 USA
Cequent Help Hotline: 1-800-234-6992
www.rolaproducts.com
59108 Rev A 1007
Adventure System
– Class II
59108
Use outermost holes to
attach cargo tray to
support brackets.
Remove the Bumper Pack from the tray, and place the empty Cargo Tray onto the support brackets with the lights or reflectors
facing rearward. Line up the outer holes in the Cargo Tray with the last hole in each end of the support brackets. Install the four
(4) 5/16” x 2-1/4” long cap screws with 5/16” black zinc flat washers through the cargo tray and holes in support brackets.
Loosely install the black zinc 5/16” flat washers and lock nuts on cap screws. Tighten 5/16” cap screws to 12-24 ft-lb.
View of fasteners
to mount tray.
4
TOP VIEW OF CARGO TRAY
Cargo Tray
Please read all instructions carefully before assembly, installation and/or use of this product.
Page 3 of 5
5/16 x 2- 1/4” Cap Screws
5/16” Flat Washer - Black Zinc
(4 PLACES)
Flat Washer – Black Zinc
Lock Nut
(4 Places)
USE THE LAST HOLE IN EACH
END OF SUPPORT BRACKETS