Dynasonics MFX Series Insertion MagProbe Flow Meter - Manual (Page 8)

Rev. 01/11 -1.6- MFX
The MFX MagProbe flow meter can be successfully applied on a
wide range of metering applications. The simple to program
transmitter allows the standard product to be used on pipe sizes
ranging from 4 - 120 inch (100 - 3048 mm) pipe. A variety of liquid
applications can be accommodated: potable water, chemicals, raw
sewage, reclaimed water, cooling water, river water, plant effluent,
etc. The MFX product will not operate on fluids with very high
impedance such as DI water, distilled water, petroleum-based
liquids or glycol-based liquids.
PART 1 - INTRODUCTION
Figure 1.4 - MagProbe Design