Dynasonics MFX Series Insertion MagProbe Flow Meter - Manual (Page 9)

Rev. 01/11 -1.7- MFX
The MFX employs modular construction and provides electrical
safety for the operator. The display face contains voltages no
greater than 10 Vdc. The display face swings open to allow access
to user connections. As a general precaution, always disconnect
electrical power before opening the instrument enclosure.
Non-volatile memory retains all user-entered configuration values in
memory even if power is lost or turned off. Password protection is
provided as part of the Security menu and prevents inadvertent
configuration changes or totalizer resets.
The serial number and complete model number of your MFX and
the DMP probe that was shipped with the MFX is located on the
inside of the transmitter’s front cover. Should technical assistance
be required, please provide the Dynasonics Customer Service
Department with this information. User Safety
Data Integrity
Product
Identification
Product Matrix
Transmitter
PART 1 - INTRODUCTION