EBARA ENZX - Manual (Page 3)

Ebara Submersible Slurry Pump ENZX
Operating, Installation and Maintenance
Ebara Fluid Handling
www.pumpsebara.com 3
(803) 327-5005 • (803) 327-5097 (fax) rev. 03/14
General Information
The Ebara ENZX series submersible slurry pump is designed for continuous operation in tough, abrasive heavy
industry applications. The pump features high chrome iron construction for liquid end components such as the casing,
agitator, wear liners, and impeller which are designed for a long service life in tough applications where other
pumps of inferior construction may fail. The motor features a double mechanical seal arrangement that operates in
an oil bath away from the pumped fluid to prolong service life. In addition, the motor has thermal overload and moisture
detection float switch to notify the user of any pump problems. The robust construction and motor features allow the
model ENZX to successfully operate in conditions where other pumps will fail.
Operating Conditions
• Power Source: 460V, 60Hz, 3 Phase.
• Max. Temperature of Liquid: 40˚C, 104˚F°°°
• Max. Concentration of Solids: should not exceed 30%, Max. specific gravity not more than 1.30
• Max. Submersed Depth: 50ft (the motor must be submersed in liquid)
• The best installation is vertical, max. incline should not exceed 10
˚
Note: If operating condition is different than above, please specify with order.
Model Designation
3$,'01*$+' +3004 3,/ "
.&'+ '1*)-#2*.-
#
""" !
$
"
,, 5
,, 5
,, 5
,, 5
6 !
" 5 3$,'01*$+' +3004 3,/
!
.-' 5 2#-&#0& '1*)-
5 +2'0-#2' '1*)-
5 +2'0-#2' '1*)-
5 +2'0-#2' '1*)-
"
5
5 5
5 5
5
5
5
"