Avaya P130 - Manual (Page 122)

Chapter 6 Avaya P130 CLI
108 Avaya P130 User’s Guide
RMON Commands
No rmon history Command
Use the no rmon history command to delete an existing RMON history entry.
The syntax for this command is:
no rmon history <History Index>
No rmon alarm Command
Use the no rmon alarm command to delete an existing RMON alarm entry.
The syntax for this command is:
no rmon alarm <Alarm Index>
No rmon event Command
Use the no rmon event command to delete an existing RMON event entry.
The syntax for this command is:
no rmon event <Event Index>
Rmon alarm Command
Use the rmon alarm command to create a new RMON alarm entry.
The syntax for this command is:
rmon alarm <Alarm Number> <variable> <interval> <sampletype>
rising-threshold <rising threshold> <rising event> falling-
threshold <falling threshold> <falling event> <startup alarm>
<owner>
<Alarm number> The alarm index number of this entry (it is advisable to
use the same interface number as your alarm index
number.)
<variable> The MIB variable which will be sampled by the alarm
entry.
<interval> The interval between 2 samples
<sample type> Can be set to either delta (the difference between 2
samples) or an absolute value.