Avaya p130 embedded web manager, System requirements, Appendix a – Avaya P130 User Manual
Page 141: See appendix a)
Avaya P130 User’s Guide
127
Appendix A
Avaya P130 Embedded Web Manager
The Avaya P130 Embedded Web Manager provides the following:
•
Device Configuration - Viewing and modifying the different device
configurations.
•
Virtual LANs - Viewing and editing Virtual LAN information.
•
Link Aggregation Groups (LAGs) - Viewing and editing LAG information.
•
Software Redundancy - Setting software redundancy for ports in a P130 Switch.
•
Port Mirroring - Setting up port mirroring for ports in a P130 Switch.
•
Trap Managers Configuration - Viewing and modifying the Trap Managers
Table.
•
Switch Connected Addresses - View devices connected to selected ports.
•
IP Multicast filtering with IGMP snooping.
•
Redundancy between LAGs
— Also operates as a result of a module fault, e.g., power failure.
System Requirements
Minimum hardware and Operating System requirements are:
•
Windows® 2000 or NT® 4.0 or higher
•
Pentium® 200-Mhz-based, computer with 64 Mb of RAM
(Pentium-II recommended)
•
Minimum screen resolution of 1024 x 768 pixels
•
Microsoft® Internet Explorer 4 or higher or
Netscape Navigator® 4.x or higher
•
Sun Microsystems Java™ plug-in version 1.3.1 (supplied)
Note for users of Netscape Navigator: The Java plug-in requires certain services from
Windows 95
which are not present if Internet Explorer is not installed. In order to
add these services to the operating system, please install Internet Explorer version 3
or higher. You can then use either browser to manage the switch.