eLine Technology SIP-NVR - Manual (Page 30)

-58- -59-
10.3 System main interface
After enter the correct user name and password: click Login to system main interface
show in Figure 10-2.
Figure 10-2 main interface
10.4 NVR management
After enter main interface, select Device manager->NVR management go to NVR
configure interface.
10.4.1 Device Info
Operation description
NVR device info including:
 Device ID and Device Name
 Device Type, Manufacturer ID, Manufacturer Name
 Hardware Version and Software Version
 Camera Count and Disk Count
 Only Device Name can be edit ,other parameters can’t be edit
 When device update the device info will auto update as well and will keep same step
with the software version.
Operation Steps
Step 1
select Device manager->NVR management->Device Info
The NVR information will show as Figure 10-3.
Figure 10-3 Device info interface
Step 2
Set device Name, Enter the name and click Set .if successfully message will promote.
---- End
10.4.2 Login in
Login in interface can change the default user name and password.
Operation Steps
Step 1
Select Device manager->NVR management->Login in enter the interface show in
Figure 10-4..
eLineTechnology.com