eLine Technology SIP-NVR - Manual (Page 31)

-60- -61-
Figure 10-4 Login interface
Step 2 Enter the user name and password, and click Save to exist.
---- End
10.4.3 Date and Time
Change the date and time of NVR
Step 1 Select Device manager->NVR management->Date and time enter configure interface
show in Figure 10-5.
Figure 10-5 date and time setting
Step 2 Change the NVR date and time
Click the Set button behind the Current Computer Time to sync the time from PC to
device.
 Set the Computer current time to be NVR time.
 Set manually to change time.
 Click button to call the date ActiveX.
 Set the date.
 Input the time after the date.
---- End
10.4.4 Device Management
Add / Delete the IP cameras to NVR through the Device management.
Step 1 Select Device manager->NVR management->Device management enter the device
manager interface show in Figure 10-6.
Figure 10-6 device management
Step 2
Select the cameras and click Add.
Call the adding device interface, like Figure 10-7 to add all the network cameras.
Step 3 Select the cameras which you want to add into the NVR.
Step 4 Click Add to call the added ok, click OK, add the device successfully and exit the
interface.
eLineTechnology.com