Alamo TW84 - Manual (Page 85)

ASSEMBLY
TW84 03/07 Assembly Section 3-7
© 2007 Alamo Group Inc.
ASSEMBL
Y
HYDRAULIC OR MANUAL LIFT
Attach the Spring Assembly (Asm-0038) to the lug on the mower deck behind the Center Gearbox. Retain
using 3/4 x 3 capscrews and locknuts. Install the Hydraulic Cylinder or the manual Ratchet Lift Screw ( Asm-
0039) between the Axle Center Lug and the Lug directly behind the Center Gearbox. Tighten the two Bolts
securely.
WHEELS
Install the Wheels on the Wheel Hubs. Note: If Laminated Tires are used, place the flat side of the Lug Nut
against the Wheel Asm-R-0127. Note direction of travel and curvature of rubber segments in tire and install as
shown in Asm-R-0127.