Alamo TW84 - Manual (Page 95)

OPERATION
TW84 03/07 Operation Section 4-3
© 2007 Alamo Group Inc.
OPERA
T
ION
1. Standard Equipment and Specifications
TW84
Horsepower Required 30 HP Min. (Pull)
60 HP (Lift)
Cutting Capacity (Max.) 2”
Cutting Height 2-1/4” Min.
Safety Deflector Std.
Cutting Width 84”
Overall Length 125” (Lift, Semi-Mount)
152-1/2” (Pull)
Weight (Approx.) 1215 lbs
Hitch CAT II or II-III Q.H. (Lift)
Clevis (Pull)
Blade Carrier Pan
Blade Tip Speed (FPM) 14,369 (540 RPM)
15,062 (1000 RPM)
Gearbox Rating 110 HP*
Output Shaft Diameter 2”
Driveline Size Cat 4
Deck Thickness 10 Ga.
Side Skirt 1/4” x 10-3/4”
Transport Width 90-3/8”
Jack Stand Std. (pull)
Overall Width 90-3/8”
Replaceable Skid Shoes Std.
*Ratings based on actual field performance.
The Mower is designed for certain mowing applications and is rated to cut up to a specific
size vegetation (see Mower Standard Equipment and Specifications). DO NOT use this
mower to cut vegetation above the Mower’s rated capacity or to cut any type of non-vegetative material. Only
operate this Mower on a properly sized and equipped Tractor. Operating this Mower in an application for
which it is not designed and/or operating the Mower with the wrong size Tractor can cause Mower component
damage and equipment failure resulting in possible serious injury or death.
(SGM-14)