EXP Computer Bluetooth: Pairing to the Ericsson T68 Phone Using BTW 1.2 - Manual

Application Note
Pairing to the Ericsson T68 Phone
Using BTW 1.2
2002/6/29
1. Introduction
As a technology leader in the wireless networking market, WIDCOMM’s vision is to enable
consumers to easily, conveniently and securely access information and services from their
Bluetooth devices anytime and
anywhere – from homes, offices and public places.
• BTW™ is a set of software drivers and utilities that seamlessly integrate Bluetooth
technology into your desktop or laptop computer.
This document describes the procedure for discovering services on the Ericsson Bluetoothenabled
phone. Doing so requires a USB Bluetooth dongle or CF Bluetooth Adapter on a Microsoft
Windows Laptop or Desktop computer. This document was tested using the following
configuration:
• A desktop or laptop computer with an available USB interface and running the
Microsoft Windows 2000 operating system.
• BTW version 1.2.1.14 with attached Psion dongle.
• The Ericsson T68 Bluetooth-enabled cell phone.
NOTE: This procedure was tested under Windows 2000 only. On a computer running
other versions of the Microsoft Windows operating system, this procedure may be slightly
different.
2. A Quick Overview of the Procedure
The basic procedure for performing this operation is fairly simple. Here is a quick overview of
the process:
1) Install BTW on your Windows Computer (98 SE, 2000, XP, or Me version)
2) Pair the phone to the BTW system using a pass key. You can initiate the pairing from
either the phone or the BTW system.
3) Discover services on the phone in the normal way.
NOTE: This document only covers the procedure for pairing to the Ericsson phone and
discovering its services. Making use of those services is beyond the scope of this
document.
3. BTW Setup
3.1. CONNECTING THE USB Bluetooth D ONGLE TO YOUR D ESKTOP OR L APTOP
C OMPUTER
Installing the USB Bluetooth dongle is quick and painless. Connect the USB cable to the
matching USB connector on your PC, laptop computer, or USB hub.
3.2. INSTALLING THE BTW S OFTWARE
The BTW software is installed from a CDROM using an InstallShield executable. For detailed
instruction on how to install the software, see the BTW Installation and Uninstallation
Instructions. This document will be supplied with your BTW CD and has the file name
(readme.doc or readme.pdf).