EXP Computer Bluetooth: Pairing to the Ericsson T68 Phone Using BTW 1.2 - Manual (Page 3)

11. If the pairing fails, try again. Pairing failure is indicated on the phone with a Pairing Failed
message.
12. If pairing is successful, then the phone will state: Pairing Succeeded.
13. Answer Yes to the Name tag query.
14. The phone will respond with Adding to Paired Devices and a new entry will appear in the
Paired devices list. You now have the ability to discover services and connect to one of these
services.
15. You can verify that pairing was successful on the BTW side, by right-clicking on the
BTTray icon and selecting Setup
→Security as shown below:
16. The resulting Bluetooth Security display should show the Ericsson phone as a paired device.