EXP Computer CRW with CDROM Card User Manual
Page 29
Advertising
- 23 -
1. Open OS/2 System ! Open System Setup ! Open Selective Install.
2. Check if PCMCIA Support has been installed
in the System Configuration window, if yes,
you may exit now, otherwise, perform the
following steps to continue.
3. Select the check box to the left of PCMCIA
Support to display the Select PCMCIA system
window.
4. Select the appropriate system (this should either be a
direct match with your target install system or a
known compatible system).
5. Select
OK
! Select Install, then, follow the on-screen instructions to finish the installation
Advertising