EXP Computer CRW with DVD ROM Card - Manual (Page 22)

- 16 -
SOFTWARE INSTALLATION FOR WINDOWS XP
1. Boot-up your computer into Windows XP,
making sure the device driver for ‘PCMCIA
Adapters’ has been installed and is available. To
check this, right-click ‘My Computer’, click
‘Properties’ then ‘Hardware’ and then ‘Device
Manager’ to open the ‘Device Manager’
window. Refer to the figure shown alongside to
see if the PCMCIA Controller is installed without error.
2. Ensure the PCMCIA interface cable and then the AC adapter connections are made as described in
Hardware Installation. Slowly insert the PC Card of interface cable into the PCMCIA socket of
computer and press firmly until the connector is seated (Please note that the PC Card is keyed to
guide for proper insertion).
3. Windows will find a new hardware
named ‘PCMCIA PnPIDE’, and start
up the ‘Found New Hardware Wizard’.
On the first screen, select ‘Install from a
list or specific location (Advanced)’,
and then click Next.