EXP Computer CRW with DVD ROM Card - Manual (Page 30)

- 24 -
If any errors occur or the external CD-RW does not work, you should reboot your computer again.
When the system displays ‘Starting MS-DOS...’, press the F8 key to execute CONFIG.SYS and
AUTOEXEC.BAT step by step. You can consistently press the Y key to see each command’s message.
Error Messages Generated By ARICDF.EXE:
♦ Error: PCMCIA CD-ROM/DVD-ROM card is not present!
If the above message appears, it means ARICDF can’t find the PCMCIA interface card in your
PCMCIA sockets. Make sure the PCMCIA interface card is inserted firmly.
♦ Error: Illegal arguments!
The above error message means that there are invalid arguments in the ARICDF line of
CONFIG.SYS. Please refer to the section titled ‘Manual Installation’ for the usage of
ARICDF.EXE.
♦ Error: I/O port must be specified!
The above message means you have not specified the I/O port argument in the ARICDF line of
CONFIG.SYS.
♦ Error: Illegal I/O port!
The above message means invalid I/O ports in the ARICDF line of CONFIG.SYS have been
selected. The legal I/O port numbers are: 320, 340, and 360.
♦ Error: There is no available 4K memory for mapping!
The above message means ARICDF can’t find available 4K memory between C000:0 to EFFF:0.
This error can be corrected by changing the EMM386 line of CONFIG.SYS to exclude at least 4K
memory for mapping. For example,
DEVICE=C:\DOS\EMM386.EXE ... X=D000-D3FF
♦ Error: The INTEL 82365SL PCMCIA controller is not detected in your system. You should
contact your dealer to get PCMCIA support software.
The above message means the PCMCIA controller of your computer is not INTEL 82365SL
compatible. In this case, you should install PCMCIA support software that should be supplied by
the notebook manufacturer.