EXP Computer ThinLan 100 - Manual (Page 8)

Press <Enter> to continue running the install program. The program will then
display the main menu screen. Choose “Setting Hardware” and Press <Enter> to
continue with installation.
Figure 2 Main Menu
Setting Network Hardware
The Network Hardware Configuration screen displays the default setting for the
IRQ Level, I/O Base Address, and Memory location. If there is a conflict with any
of these settings, choose the setting that you want to change, press <Enter> and
make the appropriate changes. If all the setting are acceptable, select Continue or
press <Esc> key to return to the Main Menu.
Figure 3 Network Hardware Configuration
Select Network Operating system
After returning to the Main Menu, choose Select Network Operating System and
press <Enter>. Select you network vender and press <Enter>.
Figure 4 Network Type selection
The program will then confirm your selected network type and prompt you to enter
the path where the network operating files are located.
Figure 5 Network Operating System Path