Biamp TEC-1 - Manual (Page 7)

7
TEC-1 SET UP
Edit Device ID
To name the unit, scroll to the ID Tag icon and press the Select button. Use the scroll wheel and Select button
to select the desired characters. Scroll to the icon and select it to delete the previous character. The default
Device ID is “TEC-1ID 01”. The Device ID must match that of a corresponding block in the Tesira design. More
than one unit may be identified with the same design block (same ID). Device IDs may also be assigned via
Device Maintenance in the Tesira software.
Edit Network Configuration
To edit the network configuration, scroll to the Network icon and press the Select button. The default setting
(Auto) allows the device to receive its network configuration from a DHCP server. This allows TEC-1 to be
discovered by a Tesira device that also has default settings. The default hostname is “TEC-1-” followed by its
serial number. Select the hostname to edit it in a similar way of editing the device ID. The network settings
may instead be assigned via Device Maintenance in the Tesira software.
To specify a static IP address, change the “Auto IP?” to Static and select the IP address. TEC-1 will display the
Edit IP Address screen where the IP address, network mask, and gateway can be edited. Resetting the IP
address sets the IP address, network mask, and gateway back to 0.