Introduction – BJM Pumps SKX150CSSF-575T User Manual
Page 4
4
INTRODUCTION
This Installation, Operation and Maintenance manual provides important information on
safety and the proper inspection, disassembly, assembly and testing of the BJM
Pumps® SK-F & SKX-F Series submersible pump. This manual also contains
information to optimize performance and longevity of your BJM Pumps submersible
pump. The F-Series
fahrenheit
™ pumps are engineered to pump water based
liquids up to 200° Fahrenheit (93°C).
The submersible SK-F Series pumps are designed to pump water, wastewater,
and industrial wastewater that includes up to 10% by volume of solids. The SKX-F
Series pumps are designed to pump corrosive liquids along with some solids in
concentrations chemically compatible with 316SS and FKM. The SK-F & SKX-F
Series pumps are not explosion-proof. They are not designed to pump volatile or
flammable liquids.
Note: Consult chemical resistance chart for compatibility between pump
materials and liquid before operating pump. Consult BJM engineering if there is a
question on chemical compatibility.
If you have any questions regarding the inspection, disassembly, and assembly or
testing please contact your BJM Pumps distributor, or BJM Pumps, LLC.
BJM Pumps, LLC
Phone: 877-256-7867
123 Spencer Plain Rd.
Phone: 860-399-5937
Old Saybrook, CT 06475, USA
Fax: 860-399-7784
Information, including pump data sheets and performance curves, is also available on
our web site
For assistance with your electric power source, please contact a certified electrician.
Please pay attention to the following alert notifications. They are used to notify
operators and maintenance personnel to pay special attention to procedures, to avoid
causing damage to the equipment, and to avoid situations that could be dangerous to
personnel.
NOTE: Instructions to aid in installation, operation, and maintenance or which
clarify a procedure.
Immediate hazards that WILL result in severe personal injury or
death. These instructions describe the procedure required and the injury which will
result from failure to follow the procedure.
Hazards or unsafe practices that COULD result in severe personal
injury or death. These instructions describe the procedure required, and the injury which
could result from failure to follow the procedure.