ELRO DWH SERIES VIDEO SECURITY SYSTEM - Manual (Page 27)

4. Enter your security code.
5. Tap OK. The system will return to Network Setup screen.
Note:
Security code must be entered to gain remote access.
Network Information
1. Tap the Network Information icon to display the Network Information
screen.
2. Tap the BACK arrow to return to the previous screen.
Note:
The DID is a unique code specific to your monitor and is required to gain
remote access to your cameras over the internet.
The information in the DHCP setting is assigned to your monitor from your
home router.
Alarm Setup Screen
2
7